Description
The S-HS-2205 slickline wire hasimproved by increasing its strength by 10~15% while maintaining the same weight, and greatly improving the tension deadweight ratio. Compared to traditional products, it is more suitable for deep well testing..
| C | Si | Mn | P | S | Cr | Ni | Mo | Co | N | Cu | W | Fe | |
| Percentage | <0.03 | <1.0 | <2.0 | <0.035 | <0.020 | 21.5-23.0 | 4.8-6.5 | 2.8-3.5 | – | 0.15-0.20 | – | – | balance |
| OD | Weight | PREN | Breaking Strength | |
| mm | kg/km | lbs | Kn | |
| 3.2 | 64 | 36 | 3315 | 14.75 |
| 3.8 | 90 | 36 | 4770 | 21.22 |
| 4 | 100 | 36 | 5150 | 22.91 |
Any outer diameter and length can be customized, the whole slickline wire of Φ4.0mm can be reached to 13000+ meters.
Can recommend slickline type selection based on the user’s target well conditions (temperature, pressure, H2S, CO2, chloride concentration, etc.)
All slickline wire products are sampled at both ends for bending, stretching, torsion and wraping tests before leaving the factory.
From the purchase and processing of raw materials until the product delivery to user, we adopt quality control measures such as continuous monitoring /recording / measurement to ensure that the product is free from any defects.
Self-owned testing center has the ability of chemical composition analysis, metallographic analysis,
mechanical property testing, scanning electron microscope analysis and energy spectrum analysis.
Guarantee that the delivered slickline wire is free of weld spots and pass the Eddy Current Test.
Reviews
There are no reviews yet.